M6 M10 BrassH80 C83600 C69300 C69400 Male And Female Hex Head Standoff Gold plating standoff

M6 M10 BrassH80 C83600 C69300 C69400 Male And Female Hex Head Standoff Gold plating standoff
 
Product Description:
What is a standoff? As the name suggests, the standoff is a screw with internal thread at one end and external thread at the other end, and the broad sense of the standoff also includes screws with internal threads at both ends. Its appearance is hexagonal, play a role in fastening and isolating, because it is generally made of hexagonal copper rods as raw materials, so the standoff is also known as copper column, hexagonal copper column, copper isolation column or copper gasket column.
The use of copper columns. Hexagonal screws are mainly used in computers, circuit boards and other industries, when one end is screwed into the locked object, the hexagonal column is exposed to the outside, which can fix or isolate other objects.
The main specifications of standoff are M3, M4, M5, M6, M8, M10, etc., and the specifications of the hexagonal column are 5, 6, 8, 10, 12, 15 mm, etc., of which the M3 series is the most. Materials in addition to copper and stainless steel, there are fast cutting steel.
 
Hexagonal studs are also known as yin and yang studs, it is one end of the internal thread and one end of the external thread, but are hexagonal, can play a role in fastening and isolation.
Mostly used in computers, circuit boards and other industries, when used, when one end is screwed into the workpiece being fastened, the hexagonal column is exposed on the surface, can be fixed or isolated from other workpieces. Such as in the computer mainframe, the external thread can be connected to the motherboard inside the mainframe, the internal thread can be isolated from the motherboard and sheet metal shell.
 
Applications:
Brass is an alloy composed of copper and zinc, brass composed of copper and zinc is called ordinary brass, if it is a variety of alloys composed of more than two elements is called special brass. Brass has strong wear resistance, brass is often used in the manufacture of valves, water pipes, air-conditioning inside and outside the machine connecting pipes and radiators.
Ordinary brass is a copper-zinc binary alloy, its zinc content varies widely, so its room temperature organisation is also very different. According to the Cu-Zn binary state diagram, the room temperature organisation of brass has three kinds: brass with zinc content below 35%, the microstructure at room temperature consists of a single-phase α solid solution, known as α brass; zinc content in the range of 36% to 46% brass, the microstructure at room temperature consists of (α + β) two-phase composition, known as (α + β) brass (two-phase brass); zinc content More than 46% to 50% of the brass, room temperature microstructure is composed of only β phase, known as β brass.
 
The copper content of T1 is the highest, above 99.95%, and the total impurity does not exceed 0.05%; T2 copper refers to copper silver alloy, its copper content is more than 99.90%, there is no requirement for phosphorus; Finally, T3 copper, copper content of more than 99.7%, the total impurity content does not exceed 0.3%.

1, different purity

T1 pure copper content is the highest, but also the purest.T2 copper refers to copper-silver alloy, in which the copper copper + silver element content > 99.9% can be, there is no requirement for phosphorus element.T3 copper content is copper + silver CuAg: ≥ 99.70.T4 copper content is the lowest.

2, different strength

T1 copper mechanical properties tensile strength: σb (MPa) ≥ 295, T2 copper tensile strength σb (MPa): ≥ 195, T3 copper tensile strength σb (MPa): ≥ 210, T4 copper tensile strength is lower.

3, different electrical conductivity

T1 pure copper has good electrical conductivity, thermal conductivity, corrosion resistance and processing performance, can be welded and fibre welding. Containing reduced electrical conductivity, thermal conductivity of impurities less, trace amounts of oxygen on the electrical conductivity, thermal conductivity and processing and other properties do not have much impact.T2 copper has a good electrical conductivity, thermal conductivity, corrosion resistance and processing performance, can be welded and brazed. T2 copper has good electrical and thermal conductivity, corrosion resistance and processing properties, can be welded and brazed. Contains less impurities to reduce electrical and thermal conductivity, trace amounts of oxygen on the electrical, thermal conductivity and processing performance impact is not significant, but prone to cause ‘hydrogen disease’.

T3 copper content to reduce electrical conductivity, thermal conductivity impurities, oxygen content is higher than T2, more likely to cause ‘hydrogen disease’, can not be processed in a high-temperature reducing atmosphere (annealing, welding, etc.) and use.T4 copper content impurities more, the conductivity has been reduced.

Special Brass
In the ordinary brass to add other alloying elements composed of multiple alloys known as special brass. The commonly added elements are lead, tin, aluminium, etc., which can be called lead brass, tin brass, aluminium brass accordingly. The purpose of adding alloying elements. The main purpose is to improve the tensile strength and processability.
Code: for ‘H + main plus element symbol (except zinc) + copper mass fraction + main plus element mass fraction + other elements mass fraction’ said.
For example: HPb59-1 indicates that the mass fraction of copper is 59%, the mass fraction of lead is 1%, and the balance is zinc lead brass.
 
Oxidation temperature and time for different steel parts:

 
 
About Us



Package

M6 M10 BrassH80 C83600 C69300 C69400 Male And Female Hex Head Standoff Gold plating standoff Images